EPA - Euroboard PC Assemblies for 19" racks

CPCI- or ISA/AT96 bus boards are available with 3 - 10 slots, they will be equipped with SBC, digital- or analogue peripheral boards and memory module, counter-, relay- and div. adapter boards (i.e. PC/104, field bus, CAN etc.). In addition we complete the boards with front panel, cable set, display module, touch screen and/or keyboard, power supply and 19" housing.

Set of euroboards for 19”racks

SBCs containing CPU, RAM-memory, Flash card, hard disk, CompactFlash, Mini-PCI, PC card, PC/104- sandwich board, 19" front panel incl. all connectors, set of cables, the O.S. or a complete software image. These IPC modules may also be built in a 19" -box. They will be tested and delivered to the client ready to start. Applications : Automation systems for measurement & control devices, communication appliances, data collection purposes etc.

PBX - IPC - Power Box

ETX-Baseboard with ETX-CPU changeable 100MHz to 2GHz, 2xUSB, 4xCOM, LPT, KEY, VGA TTL/LVDS, CF disk, ETH, I²C, CPCI- or ISA/AT96 bus 3-7 slots, 19" /3U housing 28- or 42HP, Power supply 95-265V AC or 9-36V DC; Options: WIN XP embedded or Linux.

KOM - Communication System in a 19" /3U/84HP-rack

CPU baseboard with ETX module VIA Eden 400MHz; CompactFlash memory, modem, 2x Ethernet 10/100MBit/s, 2xUSB, 2xCOM, Key-board, patch board 6 connectors, ISA/AT96 bus 5 slots, 6,5" LCD, power supply 95-265V AC or 24V DC, operation system installed on CF memory.

PMS - PC based Machine control

Some examples of applications produced in quantities > 100 : Assembly line for automotive control panels Control system for rubber tired gantry cranes System to collect measuring data in test vehicles Conveyor technique of safe deposit boxes in banking automation Engine test bench for vehicle motors Measuring and control technology for gas pipelines Data collection and storage equipment in railway carriages.

MSP - PC based Machine Control

19" /3U/28HP rack or 19" /3U/42HP rack or 19" /3U/63HP rack or 19" /3U/84HP rack each containing the IPC, completed by peripheral boards from the MASS assortment of functions. Each clients"application may get a different configuration according to special needs.

KSP - Compact PC with Service Equipment for Controls

Euro board-PC in a 19" /3U rack of 42HP, equipped with boards 3xcounter, 64 digital IN/OUT and 16 analogue IN/OUT. OS: WIN XP, XP embedded, Linux, Soft PLC, drivers and utilities. Additional: external display unit + Mini keyboard for updating of software and for service purposes.

CPS - Compact PCI Control Systems

CPUs Pentium IV up to 2 GHz, 1GB SODIMM, 512 KB cache, 133MHz bus speed, Compact Flash, 2x Ethernet10/100Base TX, 2xUSB 2.0; 2xCOM, CRT or DVI output connector, CPCI bus board with digital- and analogue peripheral boards and power supply 95-265V AC IN, +5V DC, ±12V DC.

SER - Standard IPC rack for switching cabinets

19" /4U of height and 400mm of depth are needed to mount the IPC box in a pivoting frame. The box contains an ATX motherboard, space for 2x 5¼" drives, 1x 3½ drive; power supply 100-264V AC; power- & reset switches, 3 LEDs, fan + changeable filter behind the lockable shutter. Completion with CPU and peripheral boards on demand.

SER/D - Standard IPC rack with LCD

The same system like SER, but additional 8,4" LCD with LVDS interface by the AGP graphics controller board. Options : resistive touch screen; PCI peripheral boards, backplane + slot-CPU on request; OS and software image installed on request; keyboard in drawer 19" /1U lockable.

MPP - PC based Engine Test Bench

CPCI-board system with CPU Pentium M 1,8GHz, 1GB RAM digital- & analogue CPCI boards, 8,4" LCD with LVDS interface Membrane keyboard with 8x8 matrix encoder, 3 channels of analogue inputs by potentiometer, all interfaces and connectors at the rear side.